Roof Types

  • Asphalt
  • Hot Mop
  • Mod Bit
  • EPDM Concrete
  • TPO (needs to be atleast 10 years old)



Follow Us

EnergyMax Acrylic Elastomeric Coating

1. Product Name

EnergyMax® Acrylic Elastomeric Roof Coating

2. EPDM Coatings

P.O Box 3429, Wernersville PA 19609, EPDM Coatings N.E Sales Office, 494 Bridgeport Ave Suite 101, PMB 342 Shelton,CT 06484-4748 URL: www.epdmcoatings.net

3. Product Description

EnergyMax® Acrylic Elastomeric Roof Coating is a high solids, waterproof, roof coating for all types of roofs.

Basic Uses

Built Up Roofing, Concrete Roofs, Metal Roofs, Modified Bitumen, Polyurethane Foam,Single Ply Roofing (EPDM,PVC, TPO).

  • Meets or exceeds all the requirements of ASTM D-6083
  • Provides a seamless, durable membrane.
  • Superior adhesion to various substrates.
  • Contains fungicides and mildewcides.
  • Excellent UV protection for polyurethane foam.
  • Heat reflective coating helps reduce cooling costs.
  • Reflects the sun's UV-rays and prevents premature degradation.
  • Prevents premature roof failure by controlling thermal cycling.
  • Easy to use, non-toxic and VOC compliant water based coating.
elastomeric roof coating

4. Technical Data

See table on the following page.

5. Installation

  • All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
  • Any existing coating must be checked for good adhesion.
  • Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
  • EnergyMax® Acrylic Elastomeric Roof Coating is ready to use. Thinning is not recommended.
  • Containers should not be left open for extended periods of time.
  • Follow our roof repair androof restoration procedures and always perform a coating adhesion test before doing the entire roof.
  • Spray:Airless Sprayer , 1gpm, 3,000 psi, .027 or .031 tip.
  • Brush: Good quality synthetic bristle brush
  • Roller: Long nap roller
  • Clean Up: Water

6. Availability & Cost

EnergyMax® Acrylic Elastomeric Roof Coating is available directly from EPDM Coatings and from online distributors. Contact EPDM Coatings for pricing information.

7. Warranty

On preapproved, qualified applications, using EPDM approved applicators, a 10 year warranty is available. Contact EPDM Coatings for complete warranty information.

8. Maintenance

Periodic maintenance of EPDM Roof Restoration System ensures extended service life and maintains reflectivity.

9. Technical Services

Contact EPDM Coatings for Technical Support. Additional information, product literature, brochures, and specifications are available.

10. Filing Services

Additional product information is available from EPDM Coatings.

This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.

EnergyMax® Acrylic Elastomeric Roof Coating Technical Data

Property Value Test Method ASTM D-6083
Color White or any custom color
Density 11.5 ± .2 lbs per gallon
Hardness 48±5 Shore A ASTM D-2240
Viscosity 120KU ASTM D-562 85-141 Pass
Solids by weight 66% ± 2% ASTM D-1644 >60 Pass
Solids by volume 55% ± 2% ASTM D-2697 >50 Pass
Tensile Strength 280 ± 50 psi ASTM D-2370 >200 Pass
Permeability 5.5 perms ASTM D-1653 <50 Pass
Initial Elongation 400%± 25 ASTM D-2370 >100 Pass
Final Elongation (1000 hours) 320%± 25 ASTM D-2370 >100 Pass
Tear Resistance 78 lbf/in ASTM D-624 >60
Low Temp Flexibility Passes 180° flex over 1/2? mandrel @ 23°C/77°F ASTM D-522 Pass
Reflectivity Initial 0.86, After 3 Years 0.80 ASTM C-1549 Pass
Emissivity 0.89 ASTM C-1371 Pass
Flash Point None
Coverage 1.25 - 1.5 gal/100 s.f. per coat. 2 coats recommended.
Application Temperature 55°F (and rising) - 100°F, Less than 85% relative humidity.
Dry Time Dry to touch in 4 - 6 hours, 12 - 24 hours to recoat. Depending on humidity and moisture.
Shelf Life 12 months @ 40°-90°F
Clean Up Water
VOC <50 g/lit

Caution: EnergyMax® Acrylic Elastomeric Roof Coating is a water-based product which will freeze and become unusable at temperatures below 32°F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. EPDM Coatings must be completely dry before exposing to water or foot traffic. Keep EPDM Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.

Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer's sole responsibilty shall be to replace that portion of any product that proved to be defective.

This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.